MUZZLELOADING
RAMRODS

"DELRIN" is a space-age material that can literally be bent in a circle without breaking. The material is black giving the ramrod a traditional ebony wood look. All tips are securely fastened to the rods either by a pin or with threads.

The Patriot series ramrods are a replacement ramrod, made of Delrin, for many of the popular rifles produced by several manufactures including Thompson Center Arms, Connecticut Valley Arms, Traditions and Lyman.  The replacement rods come with a jag adapter on one end and a ball seating tip on the other end.  Brass or steel is used that is appropriate with the original ramrod.  The jag adapter is threaded 10-32 and the seater end is threaded 8-32 to accept standard accessories.

These Delrn ramrods are 3/8" in diameter and 48" long with a jag-tip of appropriate caliber on one end.  These brass one piece ramrod tip and jag combinations have 10-32 threads to accept standard ramrod accessories.  The jag has a spherically cupped end which will center ramrod over ball, thus preventing damage to the ball or barrel.  It is intended that the user will cut the rod to the required length.

These Delrin rods are 3/8” diameter and are 48” long.  This rod has the TRESO combination jag-bullet puller tips.  The base for the combination ramrod tip has a built in steel lag screw for pulling bullets or retrieving lost patches.  A jag or cover can be screwed on the base over the bullet puller.  All parts are brass except for the steel bullet puller screw.  These rods are intended to be cut to the required length by the user.

This three inch long aluminum handle comes with an 8-32 or 10-32 steel stud to screw into one end of a ramrod converting it into a convenient cleaning rod.