These flintlock pan primers are operated by a simple downward push into the pan.  Both will dispense approximately 3 grains of 4fg priming powder in the pan.  These pan primers are made of brass with a stainless steel spring.  A lanyard hole is provided in a nicely turned base.  The priming mechanism is in a knurled, threaded housing that is removable for easy filing.  The standard primer holds approximately 80 grains of powder and the magnum primer holds about 230 grains.

The pan priming valve for Colt flask operates the same as in our Pan Primer. It is threaded to fit Colt or smaller flasks.  The valve is used by removing the flask valve spring, locking the flask valve open, and threading the priming valve into the spout hole.  It is designed for 4fg black powder only and dispenses approximately 3 grains of powder.

TRESO touch hole liners are made from the same tough and erosion resistant Ampco alloy as the TRESO nipples.  The flash hole is .0625 diameter.  The TRESO flint touch hole liner is installed in a ¼” x 28 thread in the side of the barrel with a wrench.  A new model, available in two thread sizes is removable with a screw driver and is handy for interchangeable flint/percussion lock firearms.  We recommend anti-seize material be coated on nipple and touch hole liner threads to make them more easily removed.

Hand-knapped flints are made in England by skilled craftsmen and are very uniform in size and quality. Available in pistol, rifle and musket sizes (5/8" , 3/4", and 7/8" respectively). Priced per each.

Soft supple white cowhide. Holds flint in place perfectly. For best results use a new leather every time you change flints. Approximately 1 5/16 x 13/16". Package of three.

Traditions™ Frizzen wipes are meant to reach into those hard to reach areas of your frizzen. Patches are small enough to get into even the tightest places and remove all leftover residue.

The Flintlock Pan Cover is designed to cover the entire lock and protect it from the elements, It is made from soft brown to black leather. Also known as a cow's knee. By October Country

Keeps snow and rain off your lock. Helps keep your pan powder or percussion caps ;dry. Fits most small to medium sized locks. By - The Leatherman

Flint Knapper set By Pedersoli - Iit has a small hammer with brass ends; A small brush to clean the pan; Vent pick; Two carbon steel pins to screw/unscrew the top jaw. A Useful tool for al Flintlock Shjooters.

All the basics you will need for flint lock maintenance while in the field. Contains: pan brush, jaw tightening rod, stainless steel touch hole pick and small screwdriver with 3 different size blades for a multitude of uses including rear sight adjustment. Lightweight and compact. All tools provided on a handy key ring.